Bulky waste · Commercial waste · Construction & demolition waste
APPLICATIONS
Explore shredding applications for bulky waste, commercial waste and construction & demolition (C&D) waste, then configure the shaft, screen and drive around the assessed feed.
MATERIAL SELECTOR
Choose the actual feed to see the relevant application and likely shaft discussion. The result is a starting point, not a final machine specification.
LIKELY STARTING POINT
Discuss the C&D feed, concrete content, hammer tooling, mineral breaker bars and required screen configuration.
Final machine and shaft selection is subject to a material assessment by WERT UK.SEVEN APPLICATION FAMILIES
01Hammer shaft
Process assessed construction & demolition (C&D) waste—including mixed debris, concrete, reinforced concrete and stone—with hammer shafts, controlled feed and the required screen system.
≈ 180–220 tonnes per hourmanufacturer-stated average
Explore application →
02Star shaft
Process pallets, waste timber and selected bulky wood with shaft geometry chosen for draw-in behaviour, output definition and the contamination profile.
≈ 35–42 tonnes per hourmanufacturer-stated average
Explore application →
03Star shaft
Open up fibrous green waste and irregular rootstocks with a configuration designed for draw-in, changing moisture and embedded soil or stone.
≈ 25–35 tonnes per hourmanufacturer-stated average
Explore application →
04Star shaft
Reduce assessed bulky waste, commercial waste and variable municipal waste streams on an interchangeable-shaft platform that can be reconfigured around the feed.
≈ 18–25 tonnes per hourmanufacturer-stated average
Explore application →
05Star shaft
Grip and reduce suitable tyre and rubber streams using shaft tooling selected around elasticity, steel content and the required downstream fraction.
≈ 13–18 tonnes per hourmanufacturer-stated average
Explore application →
06Metal shaft
Reduce selected light scrap, profiles and metal-bearing materials with a metal-shaft configuration and a tightly controlled feed assessment.
Explore application →
07Star shaft
Prepare paper, plastics and selected mixed materials with shafts chosen for controlled draw-in, tearing and the downstream sorting process.
≈ 12–19 tonnes per hourmanufacturer-stated average
Explore application →WHAT CHANGES PERFORMANCE
Machine model is only one variable. Shaft geometry, screen basket, breaker bar, material condition, feed consistency, loader technique and required final output all shape the result.
NEXT STEP
Tell us whether you process bulky waste, commercial waste, construction & demolition waste or another stream. WERT UK will help identify the machine and shaft configuration to assess.